|
Directions to the Craft Center |
|
|
|
|
Written by Darren Gozy
|
Driving directions and map to the NC State Craft Center.
From Chapel Hill/Durham:
Take Interstate 40; exit at Wade Avenue. Wade Avenue will cross under
the beltline. Go to the 3rd traffic light, turn right onto Faircloth.
Turn left onto Hillsborough at the next light. Follow Hillsborough to
Watauga Club Drive, shortly before the NC State Bell Tower. Turn right
onto Watauga Club Drive, follow left to Pullen Drive, turn right onto
Pullen. Follow Pullen Drive over railroad bridge, turn right onto Dunn
Avenue. Thompson Building is on the left, at the corner of Jensen
Drive. Parking is available after 5 p.m. and on weekends in any
available space not marked DE (enforced until 12 midnight) or 24-hour
reserve.
From North Raleigh:
Take I-440 (outer loop of the Beltline)
to the Hillsborough Street exit. Turn left at the bottom of the ramp
and proceed toward downtown. Follow Hillsborough to Watauga Club Drive,
shortly before the NC State Bell Tower. Turn right onto Watauga Club
Drive, follow left to Pullen Drive, turn right onto Pullen. Follow
Pullen Drive over railroad bridge, turn right onto Dunn Avenue.
Thompson Building is on the left, at the corner of Jensen Drive.
Parking is available after 5 p.m. and on weekends in any available
space not marked DE (enforced until 12 midnight) or 24-hour reserve.
|
